1. 30 gallon tank filled with 29.75 gallons of water
2. 2 quarts of class A foam agent
3. 2- 111.8 cu.ft , 2216 psi Nitrogen bottles
4. Pressure regulator preset to 125 psi.
Performance of “FS-030”
1. Foam production: 10-1 expansion ratio equals 300 gallons of foam, up to 40-1 expansion ratio equals 1200 gallons of foam.
2. Run time is determined by foam setting . With a wet foam the system will empty within 1.5 minutes.
If you desire a very dry foam, the system can shoot up to 3 minutes.
3. The “FS030” only uses one nitrogen bottle per 30 gallon fill up.
4. The system can be completely emptied then refilled with water and foam concentrate in minutes and be re-deployed or ready to stand by for another fire.
5. Shooting distance 30’ to 125’.
6. Temperature range -30 f to 150 f.
7. Rated for class A and B fires.
***The FS-030 can produce 300 up to 1200 gallons of finished foam product***
Operating Instructions
1. Turn “Nitrogen Bottle Valve” on counter clockwise.
2. Deploy hose ( make sure “Fire Hose Nozzle” is in the off position)
3. Turn “Foam Expansion Valve” to desired foam type “ wet or dry”.
4. Turn on “Charging Valve”
5. Aim “Fire Hose Nozzle” at fire, pull back on “Fire Hose Nozzle” lever and deploy foaming agent.
Eductors and other Foam Equipment may be necessary to be used in New Sprinkler Systems as well as into excisting systmes. Eductors will have the capability to mix the appropriate amount of foam for your buildings codes and usage. The most common range is from 0.5% to 3% depending on your facilities set up.
Most Commonly used Eductor's, please refere to the Instalation Company in your local region. For more information and instalation assitance contact sales@exim.eu.com
Below you see an existing instalation at the Michelin Tire factory, Special Investigation Report available upon request.
Portable equipment is also available through our Corporate Headquaters which comes in 2 different varieties Nitrogen infused equipment or presure infused equipment.
Nitrogen enriched equipment
